UncategorizedJanuary 8, 2024by Chris0Help reduce drafts and heating bills with these weatherization tips

Sealing windows and doors from drafts is an effective way to improve energy efficiency and maintain a comfortable indoor environment. Here are steps you can take to seal windows and doors effectively:

1. Weather Stripping:

  • Install weather stripping around the edges of windows and doors to create a seal. Weather stripping comes in various materials, including adhesive-backed foam, V-strip, and door sweeps.

2. Caulking:

  • Use caulking to seal gaps and cracks around window and door frames. Silicone or latex caulks are commonly used for this purpose. Be sure to choose a caulk that is appropriate for the specific material and location.

3. Window Film:

  • Apply window film to insulate windows. This can be a plastic film that is heat-shrunk over the window using a hairdryer. Window film provides an additional layer of insulation to prevent drafts.

4. Draft Stoppers:

  • Place draft stoppers or draft snakes at the bottom of doors to block cold air from entering. These can be purchased or easily made with fabric and filling materials.

5. Door Sweeps:

  • Install door sweeps on exterior doors to seal the gap between the bottom of the door and the threshold. This prevents drafts and improves energy efficiency.

6. Insulating Curtains or Blinds:

  • Use insulating curtains or blinds to add an extra layer of insulation. These window coverings can help retain heat and block drafts.

7. Replace or Repair Weather Stripping:

  • Check the condition of existing weather stripping, and replace any that is damaged or worn. Over time, weather stripping can lose its effectiveness and may need to be updated.

8. Seal Window Air Leaks:

  • Seal any gaps or leaks around window frames using an appropriate caulking material. Check both the interior and exterior of the windows for potential air leaks.

9. Install Storm Windows:

  • Consider installing storm windows, especially if you have single-pane windows. Storm windows provide an additional layer of insulation and can significantly reduce drafts.

10. Inspect and Seal Exterior Doors: – Check for gaps or cracks around the perimeter of exterior doors. Use caulking or weather stripping to seal any openings.

11. Address Window Well Gaps: – If you have basement windows or window wells, make sure there are no gaps or openings. Seal any gaps to prevent cold air infiltration.

12. Use Draft Seals: – Install draft seals or draft excluders around windows and doors to block drafts. These are often adhesive-backed strips that can be easily applied.

Regularly inspecting and maintaining the seals around windows and doors is essential to keep your home energy-efficient. Sealing drafts not only helps with temperature control but also reduces energy bills by preventing heated or cooled air from escaping.

Leave a Reply

Your email address will not be published. Required fields are marked *

Book your service online!

Contact us now to get a free quote

Contact Us

(856) 325-9719
(856) 997-2706
3747 Church Rd Suite 104, Mt Laurel Township, NJ 08054

"Available 24/7”

(856) 325-9719
(856) 997-2706